Jig saws are ranked here by real buyer demand and verified review volume, with a 3.8-star floor applied across all 47 models in the category. The DEWALT DCS334B leads with 3,000 units bought last month and 9,477 reviews at 4.8 stars, while the BLACK+DECKER BDEJS600C holds the highest total review count in the group at 11,123 ratings at 4.7 stars and $49.99. Picks span corded 120-volt models, 18-volt cordless platforms (Makita LXT, Milwaukee M18), and 20-volt cordless platforms (DEWALT, CRAFTSMAN, BLACK+DECKER).
Every pick below was chosen based on specs and verified owner reviews, not marketing claims. Where a listing lacks published specs, that gap is called out directly so you can make an informed decision. Prices range from $39.99 to $380.27 to cover budget DIYers, mid-range tradespeople, and professional platform users.
Short answer: The DEWALT DCS334B is the top pick: a 20-volt cordless jig saw with 9,477 reviews at 4.8 stars and 3,000 units bought last month for $132.00. For the best value under $50, the BLACK+DECKER BDEJS600C has 11,123 verified reviews at 4.7 stars and is consistently one of the most purchased jig saws in its price tier.
The DEWALT DCS334B is the top-demand jig saw on this page, with 3,000 units bought last month and 9,477 reviews averaging 4.8 stars at $132.00. It runs on a 20-volt cordless platform with a 2,000-watt motor and a 4.2-pound body, making it a practical daily driver for framing, cabinet work, and finish carpentry. Based on specs and verified owner reviews, buyers consistently cite smooth cut quality and full compatibility with existing DEWALT 20-volt MAX batteries. This is a tool-only listing, so buyers without the battery and charger will need to factor that into the total cost.
Best for: DEWALT 20V platform users who want the most proven cordless jig saw in the category
Pros
Leads category by demand: 3,000 bought last month
4.8 stars across 9,477 verified reviews
2,000-watt motor on a 20-volt cordless platform
4.2-pound body for extended use without fatigue
Cons
Sold tool-only: battery and charger not included
Higher cost than corded alternatives with similar cut ability
Bottom line: The most-purchased jig saw in this group, backed by nearly 10,000 reviews. If you own DEWALT 20V batteries, the DCS334B is the default choice.
The DEWALT DCS331B is a 20-volt cordless model that has accumulated 7,970 reviews at 4.8 stars for $129.00, making it one of the most thoroughly vetted jig saws available. Its 3,000 RPM speed and 5.6-pound body place it slightly heavier than the newer DCS334B, but the combination of a 4.8-star average and 600 units bought last month confirms it continues to move steadily. Owners report solid cut quality and reliable platform compatibility across DEWALT 20-volt MAX tools.
Best for: DEWALT 20V owners who want a deeply validated, lower-cost alternative to the newer DCS334B
Pros
4.8 stars across 7,970 reviews, one of the most reliable ratings in the group
3,000 RPM speed spec published
20-volt DEWALT platform compatibility
$129.00, among the lowest prices in the 20V cordless tier
Cons
5.6-pound body is heavier than the DCS334B at 4.2 pounds
Sold tool-only: battery and charger add to total cost
Bottom line: Nearly 8,000 reviews at 4.8 stars make the DCS331B one of the safest buys in the category, especially at $129.00.
The Makita DJV181Z is the premium choice for Makita LXT platform users, priced at $380.27 with a 390-watt motor and a 2.4-kilogram body built from alloy steel. Its 4.8-star rating across 5,000 reviews reflects consistent performance on demanding cuts. The 18-volt platform means buyers already running Makita drills, recip saws, or angle grinders can share batteries directly. Published spec data does not include RPM or cut capacity for this model, but owner reviews across 5,000 responses confirm reliable performance.
Best for: Makita 18V LXT users who need the most powerful cordless jig saw in the Makita lineup
Pros
390-watt motor output, highest published wattage among cordless picks
4.8 stars across 5,000 reviews
Makita 18V LXT battery platform compatibility
Alloy steel construction
Cons
$380.27 is the highest price in the top 13 picks
No RPM or cut capacity spec published for this listing
0 units bought last month, lower current velocity than top cordless picks
Bottom line: If you are deep in the Makita ecosystem and need maximum cordless motor output, the DJV181Z at $380.27 delivers proven performance across 5,000 verified reviews.
The Makita XVJ03Z is an 18-volt cordless jig saw priced at $184.44 with 2,500 reviews at 4.8 stars and high-speed steel blade compatibility. At 6 pounds it is on the heavier end for a cordless jig saw, and like all Makita LXT tools it accepts the broad range of 18-volt batteries across the platform. Published listings do not include motor wattage or RPM for this model, but owner reviews confirm reliable daily performance on wood and panel cuts. It positions cleanly below the premium DJV181Z at roughly half the price.
Best for: Makita LXT users who want a mid-tier professional cordless jig saw without the DJV181Z price
Pros
4.8 stars across 2,500 reviews
Makita 18V LXT battery platform compatibility
High-speed steel blade compatibility
$184.44, well below the premium DJV181Z at $380.27
Cons
6-pound body is the heaviest among the top 5 picks
No motor wattage or RPM spec published for this listing
50 units bought last month, modest current demand
Bottom line: A solid 18V Makita option at $184.44 with 2,500 reviews behind it, best suited for buyers already invested in the LXT platform.
The BOSCH JS470E is the standout corded pick: it weighs just 3 pounds, handles an 8-inch cut capacity, and earns 4.8 stars across 1,413 reviews at $159.00. Its alloy steel construction and corded electric power source deliver consistent performance without battery management. Based on specs and verified owner reviews, it suits precision trim work, countertop cutouts, and panel shaping where a bench or site outlet is always available. At 3 pounds it is the lightest top-five pick in this list.
Best for: Shop or bench use where a power outlet is reliable and light weight on the saw matters
Pros
3-pound body, lightest pick in the top 5
8-inch cut capacity
4.8 stars across 1,413 reviews
Corded electric: no battery cost or runtime limit
Cons
Corded limits mobility compared to battery-powered picks
No speed (RPM/SPM) spec published for this model
100 units bought last month, lower demand than the top cordless models
Bottom line: The lightest 4.8-star pick at 3 pounds and $159.00. If you do not need cordless freedom, the JS470E is the top corded choice in this group.
The Milwaukee 2737-20 brings 4.8-star quality to the Milwaukee M18 cordless platform at $174.98. It uses an 18-volt battery and carbon steel blade construction, and its 339 reviews average 4.8 stars, tying the top rating in this group. The listing does not publish cut capacity or SPM, but owners on the Milwaukee M18 platform report smooth operation and direct battery compatibility with other M18 tools. With 50 units bought last month, it holds a consistent niche following among Milwaukee users.
Best for: Milwaukee M18 platform users who want a compatible jig saw without leaving their battery ecosystem
Pros
4.8 stars, tied for the highest rating in the group
339 reviews is a smaller sample than other top picks
No cut capacity or speed spec published
50 units bought last month, modest recent demand
Bottom line: A 4.8-star M18 option at $174.98. The lower review count means less data confidence, but platform compatibility makes it the logical Milwaukee choice.
The BLACK+DECKER BDEJS600C has accumulated more reviews than any other jig saw on this page: 11,123 ratings averaging 4.7 stars at $49.99. With 300 units bought last month, it continues to sell at a strong clip for its price point. Published specs are not listed for this model, so the review volume is the primary quality signal. Based on owner reviews, buyers use it for DIY projects, furniture assembly, and light carpentry cuts where occasional use is the norm.
Best for: DIYers and occasional users who want the most field-proven jig saw under $50
Pros
11,123 verified reviews, highest total in the group
4.7 stars at $49.99, exceptional value ratio
300 units bought last month confirms active ongoing demand
Cons
No published specs: motor wattage, voltage, weight, and cut capacity are not listed
Not suited for heavy professional or continuous use
BLACK+DECKER 20V battery ecosystem is smaller than DEWALT or Milwaukee platforms
Bottom line: 11,123 reviews at 4.7 stars makes the BDEJS600C the most validated budget jig saw in this group. Low risk at low cost.
The DEWALT DCS335B is a 20-volt cordless jig saw with a 500-watt motor and a 2.16-kilogram body, priced at $182.33 with 4.7 stars across 2,423 reviews. It runs on the DEWALT 20-volt MAX platform and uses high-speed steel blades. Compared to the DCS334B, the DCS335B's 500-watt motor output is a clearly published specification, giving buyers a concrete power anchor. With 200 units bought last month it maintains solid active demand.
Best for: DEWALT 20V users who want a clearly published motor wattage spec and brushless performance
Pros
500-watt motor, published spec for direct comparison
20-volt DEWALT platform compatibility
4.7 stars across 2,423 reviews
200 units bought last month, healthy demand
Cons
$182.33 is $50 more than the DCS334B at $132.00
Sold tool-only: battery and charger not included
2.16 kilograms (roughly 4.8 pounds) slightly heavier than the DCS334B
Bottom line: At $182.33, the DCS335B costs more than the DCS334B but its 500-watt motor is explicitly confirmed. Worth the premium for buyers who prioritize known power output.
The SKIL JS314901 is the value standout among corded jig saws: 600 watts on a 120-volt circuit for $39.99, with 2,270 reviews at 4.7 stars and 700 units bought last month. Its 4.9-pound body and high-speed steel blades make it a practical corded option for DIYers who want reliable performance at the lowest reasonable price. At 700 bought last month, it ranks among the most actively purchased picks on this entire list and proves that budget price does not mean low demand.
Best for: Budget-conscious DIYers who need reliable corded power and already have site access to an outlet
Pros
600-watt corded motor at just $39.99
700 units bought last month, strong demand for the price
4.7 stars across 2,270 reviews
High-speed steel blade compatibility
Cons
Corded limits mobility compared to battery-powered picks
4.9-pound weight is mid-range for a corded saw
No cut capacity spec published for this model
Bottom line: The best-value corded jig saw on the list. At $39.99 with 600 watts, a 4.7-star rating, and 700 units bought last month, the JS314901 punches well above its price.
The BOSCH JS260 is a mid-range jig saw priced at $109.00 with 1,624 reviews at 4.7 stars and 100 units bought last month. Published specs are not available for this listing, so the purchase decision rests primarily on BOSCH brand reputation and the review count. Its price sits cleanly between the budget picks under $50 and the premium corded BOSCH JS470E at $159.00, making it a reasonable middle-ground option for buyers who want the BOSCH name without the top-tier price.
Best for: Buyers who trust BOSCH and want a mid-range option between the entry SKIL picks and the premium JS470E
Pros
4.7 stars across 1,624 verified reviews
BOSCH build quality and brand reputation
$109.00 bridges the gap between budget and premium corded tiers
Cons
No published specs: motor power, weight, speed, and cut capacity are not listed
100 units bought last month, modest demand compared to top picks
Harder to spec-compare directly without published data
Bottom line: A well-reviewed BOSCH at $109.00. The lack of published specs means this purchase relies primarily on brand trust and review count rather than spec comparison.
The CRAFTSMAN CMES610 is a corded jig saw at $69.45, weighing 5.44 pounds with high-speed steel blade compatibility and 1,600 reviews averaging 4.7 stars. Its corded power source keeps it consistently ready on the bench, and the CRAFTSMAN brand positions it for budget-focused home improvement work. No motor wattage or speed spec is published for this model. With 0 units bought last month, recent purchase velocity is low, though 1,600 reviews confirm a long track record of buyer satisfaction.
Best for: Budget-minded homeowners who want a corded CRAFTSMAN saw for occasional trim and panel work
Pros
4.7 stars across 1,600 verified reviews
Corded for consistent power with no battery cost
$69.45, sits below the BOSCH mid-range at $109.00
High-speed steel blade compatibility
Cons
0 units bought last month, current buyer demand is low
5.44-pound body is among the heavier corded picks
No motor wattage or speed spec published
Bottom line: Solid long-term ratings at $69.45, but low recent purchase velocity suggests buyers are currently choosing other models. Best if the price is the deciding factor.
The CRAFTSMAN CMCS650B earns the highest rating in this group at 4.9 stars, based on 153 reviews at $129.00. It runs on a 20-volt battery platform and weighs 2.02 kilograms, using high-speed steel blades. The small sample of 153 reviews means the 4.9-star figure should be treated with some caution relative to picks with thousands of reviews, but initial buyer sentiment is clearly strong. With 50 units bought last month, it has consistent if modest ongoing demand among CRAFTSMAN 20V platform users.
Best for: CRAFTSMAN 20V platform users who want the highest-rated model in the CRAFTSMAN jig saw lineup
Pros
4.9-star rating, highest in the top 13
20-volt CRAFTSMAN cordless platform
2.02-kilogram body for a compact feel
$129.00, competitive for a 20V cordless saw
Cons
153 reviews is the smallest sample size in the top 13, limiting statistical confidence
No speed (RPM/SPM) or cut capacity spec published
50 units bought last month, modest demand
Bottom line: A promising 4.9-star rating at 2.02 kilograms and $129.00. Build confidence here as the review count grows; the early signal is very positive.
The BLACK+DECKER BDCJS20B is a 20-volt cordless jig saw at $64.63 with 4.7 stars across 1,500 reviews and a 2,500 RPM speed spec. At 4.7 pounds with a compact 11.38-by-3.81-by-10-inch footprint, it is among the most affordable entry points into 20-volt cordless cutting. Owners report that it handles standard DIY cuts on thin wood and light panels effectively. With 50 units bought last month, it maintains consistent if modest sales pace in the entry-level cordless tier.
Best for: First-time cordless jig saw buyers who want the lowest-cost entry into 20V with solid verified reviews
Pros
2,500 RPM speed spec published for direct comparison
4.7 stars across 1,500 reviews
20-volt cordless for untethered work
$64.63, the lowest-priced 20V cordless pick in the group
Cons
50 units bought last month, modest demand compared to top picks
4.7-pound body is heavier than lighter corded options at similar prices
No motor wattage or cut capacity spec published
Bottom line: At $64.63 with 1,500 reviews and 2,500 RPM confirmed, the BDCJS20B is the most affordable way into the 20-volt cordless jig saw segment.
Corded vs Cordless: Picking the Right Power Source
Corded jig saws like the BOSCH JS470E at $159.00 and the SKIL JS314901 at $39.99 never run out of power and are ideal for shop benches or any site with reliable outlets. Cordless models offer freedom to work in tight spaces, on a roof, or wherever a cord creates a hazard. The DEWALT DCS334B at $132.00 and the Makita DJV181Z at $380.27 run on battery platforms that also power drills, recip saws, and grinders, making them doubly useful if you already own compatible batteries. The tradeoff is runtime management: plan for recharging time and, for longer jobs, a spare battery on hand.
Battery Platform Compatibility
If you already own cordless tools, matching your jig saw to an existing platform saves money on batteries and chargers. DEWALT 20-volt MAX batteries work across the DCS334B, DCS331B, and DCS335B. Makita 18-volt LXT batteries fit both the DJV181Z and XVJ03Z. Milwaukee M18 batteries slot into the 2737-20. The CRAFTSMAN CMCS650B runs on 20-volt CRAFTSMAN batteries, and the BLACK+DECKER BDCJS20B uses the 20-volt BLACK+DECKER platform. Tool-only listings are the norm: buying without compatible batteries can add $50 to $100 to your total cost, so check what you already own before ordering.
Motor Power and Cutting Speed
Published motor wattage varies widely in this group. The BOSCH JS470EB corded saw lists 840 watts and the SKIL JS314901 lists 600 watts. The DEWALT DCS334B shows 2,000 watts on its 20-volt platform and the DEWALT DCS335B lists 500 watts. Speed specs, where published, provide a secondary guide: the DEWALT DCS331B lists 3,000 RPM and the BLACK+DECKER BDCJS20B lists 2,500 RPM. Higher wattage generally means faster cuts through thick hardwood or dense engineered panels. For occasional use on 3/4-inch plywood or standard lumber, any pick in this group has sufficient output.
Cut Capacity: Maximum Material Thickness
Cut capacity tells you the thickest material the saw can handle. The BOSCH JS470E lists an 8-inch capacity and the Makita XVJ04Z (a related model in the Makita line) lists 10.13 inches. Budget models rarely publish this spec, so check your specific material requirements before buying. For cuts up to 1.5 inches in standard lumber or plywood, nearly every saw on this list is adequate. For thick hardwood slabs, structural timber, or metal plate, prioritize models with a published cut capacity figure or high motor wattage to ensure the saw will not bog down mid-cut.
Weight and Ergonomics on Long Jobs
Weight matters when cutting for more than a few minutes, especially overhead or at awkward angles. The BOSCH JS470E leads at 3 pounds, making it the lightest top-rated pick. The CRAFTSMAN CMCS650B comes in at 2.02 kilograms (roughly 4.5 pounds) and the DEWALT DCS334B at 4.2 pounds keep fatigue manageable on extended sessions. The Makita XVJ03Z is heavier at 6 pounds and the DEWALT DCS331B at 5.6 pounds. If you are frequently cutting crown molding on a ladder or scribing panels at ceiling height, a lighter model reduces strain even if it trades off some raw motor output.
Common mistakes to avoid
Buying a cordless model without checking whether you already own compatible batteries: a tool-only listing that requires a $60 to $100 battery purchase changes the effective price significantly.
Choosing a jig saw based on price alone without checking cut capacity: a saw rated for 2-inch depth will stall on a 3-inch hardwood slab no matter how well-reviewed it is.
Overlooking blade selection: the saw body is only half the equation. A coarse wood blade on laminate causes tear-out; a fine metal blade in wood cuts slowly and dulls fast. Match tooth pitch to the material.
Ignoring weight for overhead or angled cuts: a 6-pound cordless saw that seems manageable on a bench becomes tiring quickly when scribing panels at ceiling height.
Confusing RPM with SPM: some listings use strokes per minute (SPM) and some use revolutions per minute (RPM). For jig saws, strokes per minute is the relevant speed metric. A figure of 3,000 may be RPM or SPM depending on the brand.
Skipping a guide attachment for straight cuts: jig saws excel at curves but produce ragged straight lines freehand. For clean rips, use the included edge guide or clamp a straightedge to the workpiece.
Frequently asked questions
What is the difference between orbital and straight action on a jig saw?
Orbital action adds a slight forward-and-backward motion to the blade stroke, removing material faster in wood but leaving a rougher edge. Straight action is slower but cleaner and is the right choice for plastics, metals, and finish cuts where edge quality matters. Most mid-range and premium jig saws let you switch between modes.
Can a jig saw replace a circular saw for straight cuts?
Not reliably. A jig saw can follow a clamped straightedge guide, but a circular saw or table saw is far faster and more accurate for long rips. The jig saw excels at curves, plunge cuts, and internal cutouts that no straight saw can replicate. Use the right tool for each task rather than forcing one saw to do both jobs.
How do I pick the right blade for my jig saw?
Match blade tooth pitch to the material: coarse for fast wood cuts, fine for metals and plastics, and reverse-tooth blades (teeth pointing down) for laminates to prevent tear-out on the visible face. Nearly all blades in this category use the standard T-shank, which fits DEWALT, BOSCH, Makita, Milwaukee, SKIL, and CRAFTSMAN saws interchangeably.
What does tool-only mean on a cordless jig saw listing?
Tool-only means the battery and charger are sold separately. Most of the cordless picks here, including the DEWALT DCS334B and Makita DJV181Z, are listed as tool-only. This is practical if you already own compatible batteries but adds cost if you do not. Check the listing title carefully before purchasing.
How many reviews is enough to trust a jig saw rating?
Ratings based on 1,000 or more verified reviews are highly reliable. The DEWALT DCS334B has 9,477 reviews at 4.8 stars and the BLACK+DECKER BDEJS600C has 11,123 reviews at 4.7 stars; both are extremely well-established. The CRAFTSMAN CMCS650B has the highest rating in this group at 4.9 stars but only 153 reviews, which warrants more caution than its high score suggests.
Is the DEWALT DCS334B compatible with FlexVolt batteries?
DEWALT FlexVolt batteries are backward-compatible with 20-volt MAX tools, so they will power the DCS334B and DCS335B in 20-volt mode. You pay a capacity premium for FlexVolt, which makes more sense on high-draw tools like circular saws or miter saws than on a jig saw.
Final recommendation
The DEWALT DCS334B is the clear leader by buyer volume and ratings at $132.00, and the SKIL JS314901 delivers 600-watt corded performance for just $39.99 for buyers who do not need cordless freedom. Premium platform users who want maximum output should look at the Makita DJV181Z at $380.27, and the CRAFTSMAN CMCS650B earns the highest rating in this group at 4.9 stars. Whether you need a budget corded saw for occasional trim work or a professional 18-volt platform tool, the 13 picks above cover every realistic use case from $39.99 to $380.27.
We use necessary cookies to keep the site working. With your permission, we also use functional, analytics, and marketing cookies. Read our Cookie Policy.
