Bosch PR20EVSNK Router Review
Our verdict
The Bosch PR20EVSNK is a compact 1 HP palm router running at 35,000 RPM on 5.7 amps, designed for detail routing and trim work rather than heavy-duty stock removal.
Check price on AmazonBest for
Woodworkers and cabinet installers who need a compact, lightweight router for trim profiling, laminate trimming, and small-bit detail work where a full-size router would be too bulky.
Skip if
You need a full-size router for dadoes, deep profiles, or heavy material removal; at 1 HP and 5.7 amps this tool is not built for that kind of work.
- Power Source Corded Electric
- Voltage 120 Volts
- Amps 5.7 Amps
- Speed 35000 RPM
- Motor 1
- Weight 3.3 Pounds
- Priced 94% above the category median ($133.82 across 48 tracked models)
Our scorecard
-
Owner rating4.4/5
4.4 average across 190 owner ratings
-
Popularity1.7/5
190 owner reviews, fewer than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The Bosch PR20EVSNK draws 5.7 amps at 120 volts and reaches 35,000 RPM, the highest speed rating in this batch. At 1 HP it is purpose-built for light to medium routing tasks where speed matters more than torque. The 3.3-pound weight makes it noticeably easier to control than full-size units in tight or elevated positions.
At 190 reviews and a 4.4-star rating with zero units sold last month, the owner base is smaller than expected for a premium-priced compact router at $259.00. The modest review count likely reflects the specialized nature of the tool rather than low satisfaction.
At $259.00 this is a premium ask for a 1 HP palm router. Buyers should confirm this class of tool fits their actual use case before committing, since the price lands near two-base full-size combo kits with significantly more motor power.
Pros
- 35,000 RPM is the highest speed in this batch, suited for fine detail and trim routing
- 3.3-pound weight makes extended overhead or edge work comfortable
- 5.7-amp draw is easy on circuits and cords in tight spaces
- Compact form factor accesses areas where full-size routers cannot reach
Cons
- 1 HP and 5.7 amps limit this to light-duty routing; unsuitable for deep cuts or hardwood dadoes
- $259.00 is expensive relative to full-size corded routers with far more power at similar prices
- 190 reviews and zero monthly sales limits current buyer momentum data
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Amps | 5.7 Amps |
| Speed | 35000 RPM |
| Motor | 1 |
| Weight | 3.3 Pounds |
Performance notes
At 35,000 RPM on 5.7 amps and 120 volts, the PR20EVSNK is optimized for speed over torque. The 1 HP rating positions it as a trim and detail router. At 3.3 pounds it is the lightest model in this batch, which helps for extended use on vertical surfaces or precise handheld work.
What buyers say
Owners who use the PR20EVSNK for its intended application, trim work and laminate edging, rate the speed and handling positively. The most common concern is whether the price is justified for a 1 HP tool when full-size alternatives cost less. Compact handling and high RPM are the recurring positives across the 190 reviews.
More from Bosch
Similar power tools and workshop machinery to consider
Frequently asked questions
What is the Bosch PR20EVSNK best used for?
Based on its specs, the 35,000 RPM, 1 HP, 3.3-pound form factor suits edge profiling, laminate trimming, and small-bit detail work rather than heavy material removal.
Why does the PR20EVSNK cost $259 with only 1 HP?
The price reflects the kit configuration and compact precision design. For heavy-duty routing, the BOSCH 1617EVSPK at $239 delivers 2.25 HP and a plunge base with a much larger owner base.
Questions about compact versus full-size router selection?
Email hello@toolgalaxy.com and the ToolGalaxy team will help match the right spec to your project.