Makita 4100NHX1 Saw Review
Our verdict
The Makita 4100NHX1 delivers 1152 watts at 13000 RPM through an 8-inch cutting capacity in a 5.9-pound package at $185.67. Its combination of high blade speed and low weight makes it one of the more portable and fast-spinning masonry saws in this category, rated 4.6 stars across 226 verified reviews.
Check price on AmazonBest for
Tile and masonry workers who need a portable, high-speed corded saw for cutting brick, stone, and ceramic on the go, where a full benchtop wet saw would be impractical.
Skip if
You need a full wet-saw table setup for large-format tile or plan to cut wide stone slabs that require more than an 8-inch blade capacity.
- Power Source Corded Electric
- Voltage 120 Volts
- Speed 13000 RPM
- Motor 1152 watts
- Weight 5.9 Pounds
- Material High Speed Steel
- Priced 26% below the category median ($251.72 across 19 tracked models)
Our scorecard
-
Owner rating4.6/5
4.6 average across 226 owner ratings
-
Popularity2.4/5
226 owner reviews, fewer than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The Makita 4100NHX1 spins at 13000 RPM with a 1152-watt motor driving an 8-inch cutting capacity, delivering fast, aggressive cuts through tile and masonry materials. At 5.9 pounds it is one of the lightest saws in this tile and masonry batch, making it genuinely practical for contractors who carry tools between floors, job sites, or tight access areas.
High-speed steel blade compatibility positions the 4100NHX1 as a versatile masonry saw for brick, block, tile, and similar stone materials. Corded 120-volt operation at $185.67 places it solidly in the mid range of this category, above budget options but well below the $251.72 Makita 4100KB and far below the $999.00 DEWALT D24000S.
With 226 reviews at 4.6 stars, owner satisfaction is strong. Zero units were purchased last month, which may indicate a mature product with more deliberate purchasing cycles rather than a quality concern. Buyers who value speed and portability over large-format capacity will find the 4100NHX1 a well-balanced tool at its price.
Pros
- 13000 RPM delivers fast, aggressive cuts through tile and masonry
- 1152-watt motor provides solid power for an 8-inch masonry saw
- 5.9 pounds is among the lightest in the tile and masonry category
- 4.6-star rating from 226 reviews confirms buyer satisfaction
- $185.67 mid-range price with strong Makita brand support and parts availability
Cons
- 8-inch capacity limits maximum tile and stone cut size per pass
- 0 units bought last month may indicate reduced current retail availability
- No wet cutting system confirmed in the listed specs; buyers should verify dry or wet capability
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Speed | 13000 RPM |
| Motor | 1152 watts |
| Weight | 5.9 Pounds |
| Material | High Speed Steel |
| Capacity | 8 Inches |
Performance notes
Corded electric at 120 volts. Motor output is 1152 watts. Blade speed is 13000 RPM. Cutting capacity is 8 inches. Weight is 5.9 pounds. High speed steel blade compatibility is listed. The high RPM and low weight combination makes this a portable, fast-spinning masonry saw suited for tile, brick, and stone rather than the heavy structural materials cut by higher-capacity cold saws.
What buyers say
Owners praise the speed and lightweight design, with the 4.6-star rating across 226 reviews indicating consistent satisfaction. Where criticism appears, it tends to involve blade compatibility questions or project-specific limitations of the 8-inch capacity rather than any build quality issue with the saw itself.
More from Makita
Similar power tools and workshop machinery to consider
Featured in
Frequently asked questions
Is the Makita 4100NHX1 a wet or dry saw?
The listing specs do not confirm a wet cutting configuration. Buyers should verify with the current listing whether the 4100NHX1 includes water feed capability or is designed for dry cutting with dust management before purchasing for wet tile work.
How does the Makita 4100NHX1 compare to the Makita 4100KB?
The 4100NHX1 costs $185.67 with an 8-inch capacity at 13000 RPM and weighs 5.9 pounds. The 4100KB is $251.72 with a 5-inch capacity at 12200 RPM and weighs 6.6 pounds. The 4100NHX1 offers a larger cut capacity at a lower price; the 4100KB is more compact and may suit specific job requirements. For general masonry work, the 4100NHX1 covers more ground for less money.
Questions about the Makita 4100NHX1?
Email hello@toolgalaxy.com.