GALAX TD9525K Router Review
Our verdict
The GALAX TD9525K is a corded 120-volt oscillating tool running at 22,000 RPM for $35.24, offering one of the lowest price points in its category while carrying a respectable 4.4-star rating from 1,430 owners.
Check price on AmazonBest for
Budget buyers who want a corded oscillating tool with a published speed spec for straightforward cutting and sanding tasks
Skip if
Users who need variable speed control, a lighter tool, or higher amperage for sustained heavy cutting work
- Power Source Corded Electric
- Voltage 120 Volts
- Amps 1.5 Amps
- Speed 22000 RPM
- Weight 4.08 Pounds
- Priced 52% below the category median ($74.00 across 41 tracked models)
Our scorecard
-
Owner rating4.4/5
4.4 average across 1,430 owner ratings
-
Popularity4.0/5
1,430 owner reviews, more than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The GALAX TD9525K runs on 120-volt corded power, draws 1.5 amps, and spins at 22,000 RPM. At $35.24 it is one of the most affordable corded oscillating tools in the market segment, and the 22,000 RPM figure confirms it reaches typical no-load speeds for this class. The 4.08-pound weight is on the heavier side compared to sub-2-pound cordless competitors, though weight matters less in stationary or bench-top oscillating work.
With 1,430 reviews at a 4.4-star average and roughly 200 units moving per month, the TD9525K has clear real-world traction for a tool at this price. The 1.5-amp motor is adequate for light cutting, sanding, and grout removal but is not designed for sustained aggressive material removal that heavier-duty corded tools at higher amperages handle more comfortably.
The corded 120-volt design means no battery costs and no run-time limit, which makes it a logical pick for workshop bench use or stationary tasks near an outlet. Buyers who frequently work away from power sources or prefer cordless convenience should weigh battery-powered alternatives instead.
Pros
- Published spec: 22,000 RPM no-load speed for the price class
- Corded 120-volt design eliminates battery costs and run-time concerns
- $35.24 is among the lowest prices for a documented-speed oscillating tool
- 4.4-star rating from 1,430 reviews confirms consistent owner satisfaction at this tier
Cons
- 1.5-amp motor is on the lower end of corded oscillating tools and limits sustained heavy-duty performance
- 4.08-pound weight is noticeably heavier than lightweight cordless models in the same price range
- No variable speed control is confirmed in the listing specs
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Amps | 1.5 Amps |
| Speed | 22000 RPM |
| Weight | 4.08 Pounds |
Performance notes
The GALAX TD9525K is corded, drawing from a 120-volt outlet at 1.5 amps and reaching 22,000 RPM. At 4.08 pounds the tool is heavier than compact cordless oscillating tools. The 1.5-amp draw suggests a motor suited for intermittent light work: drywall cutouts, flush cuts, caulk removal, and sanding rather than continuous deep cutting through hardwood or masonry.
What buyers say
Owners tend to appreciate the tool for straightforward home improvement tasks and view the price as a clear strength. The corded design draws positive remarks from buyers who dislike managing battery charge. Some reviewers note that the tool feels adequate for occasional use but that the motor noticeably strains under harder or more prolonged cuts, consistent with the 1.5-amp spec.
Similar power tools and workshop machinery to consider
Frequently asked questions
What speed does the GALAX TD9525K run at?
The listed no-load speed is 22,000 RPM. The tool is corded, drawing from a 120-volt outlet at 1.5 amps.
How much does the GALAX TD9525K weigh?
The listed item weight is 4.08 pounds.
Is the GALAX TD9525K good for professional or trade use?
Based on the 1.5-amp motor spec, this tool is better matched to DIY and homeowner tasks than sustained professional-grade workloads. For trade use, a higher-amperage corded model would be more appropriate.