Evolution
Evolution R10TBLX 10" Jobsite Table Saw with Wheeled Stand |
$475.00100+ bought last month
View on Amazon
DEWALT DWE7485 Saw Review
Our verdict
The DEWALT DWE7485 is the top-selling compact table saw in this category, combining a 1,800-watt motor, 5,800 RPM, and a 4.8-star rating from nearly 5,800 owners at a $329 price point that is hard to argue with.
Check price on AmazonBest for
DIYers and contractors who need a portable, lightweight table saw under $400 for trim work, sheet goods, and general jobsite cutting.
Skip if
You need ripping capacity beyond a 4-inch depth of cut, or you require a full 10-inch blade for heavy framing stock.
- Power Source Corded Electric
- Voltage 120 Volts
- Speed 5800 RPM
- Motor 1800 watts
- Weight 54 Pounds
- Material Metal
- Priced 83% above the category median ($179.99 across 11 tracked models)
Our scorecard
4.8/5
overall
-
Owner rating4.8/5
4.8 average across 5,779 owner ratings
-
Popularity5.0/5
5,779 owner reviews, more than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The DEWALT DWE7485 is the highest-demand table saw in this batch, with 1,000 units sold per month and 5,779 reviews at 4.8 stars. That combination of volume and rating is rare in the power tool category and points to a product that consistently meets buyer expectations. At $329, it is priced as a mid-range compact saw, not a budget unit.
The specs show a corded electric motor rated at 1,800 watts running at 5,800 RPM off a 120-volt circuit. The 4-inch cut depth capacity suits trim boards, plywood, and dimensional lumber in the 2x range. At 54 pounds, the DWE7485 is portable enough for one person to move between a truck and a workstation without a dedicated stand. The metal body adds durability without excessive bulk.
For a compact corded saw at this price, the DWE7485 has no obvious weakness in its class. Buyers who need deeper rip cuts or a rolling stand should look at the full-size 10-inch DEWALT options. For everyone else running repetitive trim and sheet cuts on a budget, the review volume alone makes this a safe, well-documented choice.
Pros
- 4.8-star rating from 5,779 reviews, the highest-rated saw in this selection
- 1,800-watt motor at 5,800 RPM for consistent cutting speed in trim and plywood
- 54-pound weight is manageable for one-person transport to jobsites
- 1,000 units sold per month confirms it as the category's active bestseller
- 120-volt corded operation means no battery management
Cons
- 4-inch cut depth limits use on thicker stock and deep ripping
- Compact size means a smaller table surface than stationary saws
- No integrated stand; requires a separate workbench or stand purchase
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Speed | 5800 RPM |
| Motor | 1800 watts |
| Weight | 54 Pounds |
| Material | Metal |
| Capacity | 4 Inches |
Performance notes
Corded electric at 120 volts. Motor is 1,800 watts. Blade speed is 5,800 RPM. Maximum cut depth is 4 inches. Weight is 54 pounds. Body is metal. No bevel range or rip capacity dimensions are published in the listing data.
What buyers say
Owners repeatedly praise the power-to-weight ratio and the accuracy of the rip fence straight out of the box. The 5,779-review base shows sustained satisfaction across years of buyers. The most common limitation noted is the 4-inch cut depth, which occasional heavy-stock users find restrictive.
Similar power tools and workshop machinery to consider
Featured in
Frequently asked questions
What is the maximum rip capacity of the DEWALT DWE7485?
The listing specs show a 4-inch depth of cut. Rip width capacity (how far from the blade to the fence) is not published in the available spec data; check the DEWALT product page for that dimension.
Does the DWE7485 come with a stand?
No integrated stand is included based on the product description. It can be used on a workbench or paired with a compatible DEWALT table saw stand purchased separately.
More questions?
Contact the ToolGalaxy team at hello@toolgalaxy.com.