VEVOR 1-1/4 Inch SDS-Plus Rotary Hammer Drill Review
Our verdict
The VEVOR 1-1/4 Inch SDS-Plus Rotary Hammer delivers 13 amps of corded power and a standard SDS-Plus chuck for $74.83, offering serious masonry drilling capability at a budget price backed by 404 owner reviews at 4.4 stars.
Check price on AmazonBest for
General contractors and DIYers who drill regularly into concrete, brick, or block and need a capable corded SDS-Plus tool without a premium price tag.
Skip if
Professionals who require a published impact energy rating or a recognized brand with established in-person service support.
- Power Source Corded Electric
- Voltage 110 Volts
- Amps 13 Amps
- Speed 940 RPM
- Weight 11 Pounds
- Dimensions 1"L x 1"W x 1"H
- Priced 48% below the category median ($144.32 across 49 tracked models)
Our scorecard
-
Owner rating4.4/5
4.4 average across 404 owner ratings
-
Popularity2.9/5
404 owner reviews, more than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The VEVOR 1-1/4 Inch SDS-Plus Rotary Hammer draws 13 amps from a 110-volt outlet and runs at 940 RPM. At 11 pounds, it matches the weight class of standard mid-range corded rotary hammers, and the SDS-Plus chuck opens up a wide ecosystem of widely available bits. The corded design eliminates battery swap interruptions on multi-anchor jobs.
With 404 reviews at 4.4 stars, this VEVOR model has attracted meaningful buyer feedback across a broad range of applications. Fifty purchases per month reflect steady demand from buyers who value 13-amp power at a sub-$75 price. The corded design sustains full power output regardless of how long the job runs.
The 940 RPM speed is on the lower end for rotary hammers, which typically means more torque emphasis over raw spinning speed. This suits larger-diameter concrete anchor drilling where slower, more forceful penetration is more effective than high RPM. For repetitive 5/8-inch to 1-inch anchor installation in concrete, the power-to-price ratio is hard to beat.
Pros
- 13 amps of corded power at $74.83 is strong value per watt
- SDS-Plus chuck provides access to the widest available bit selection
- 404 reviews at 4.4 stars shows broad buyer validation
- Unlimited runtime from corded 110-volt power
- 940 RPM at high amperage suits larger bit diameters
Cons
- 11-pound weight limits comfort during extended overhead or vertical drilling
- No blows-per-minute or impact joule figure published in listing specs
- VEVOR brand has limited in-person service center presence
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 110 Volts |
| Amps | 13 Amps |
| Speed | 940 RPM |
| Weight | 11 Pounds |
| Dimensions | 1"L x 1"W x 1"H |
Performance notes
The VEVOR 1-1/4 Inch SDS-Plus draws 13 amps at 110 volts with 940 RPM chuck speed. The SDS-Plus chuck standard accepts a large library of bits across manufacturers. At 11 pounds and 940 RPM, the tool is best suited for 5/8-inch to 1-inch diameter concrete holes rather than high-speed light-duty work. No BPM spec is published.
What buyers say
Reviewers tend to praise the power-to-price ratio and note that the tool handles regular masonry work reliably. Common complaints center on the lack of published impact energy specs and occasional concerns about long-term motor durability compared to higher-priced brands.
More from VEVOR
Similar power tools and workshop machinery to consider
Frequently asked questions
What size bits does the VEVOR 1-1/4 Inch SDS-Plus accept?
It uses SDS-Plus bits, the standard chuck type for rotary hammers in this size class. The 1-1/4 inch designation refers to the maximum chuck capacity, not the bit shank size.
Is 13 amps enough for drilling through reinforced concrete?
Based on the specs, 13 amps at 940 RPM provides solid power for standard concrete anchoring and masonry work. For heavily reinforced structural concrete, a tool with a published impact energy figure is advisable for direct comparison.
Need help comparing corded SDS-Plus options?
Email the ToolGalaxy team at hello@toolgalaxy.com with your application details for a personalized recommendation.