HYCHIKA TX104 Sander Review
Our verdict
The HYCHIKA TX104 is a 120V corded detail sander that runs at 13000 RPM on 1.2 amps, priced at $22.94 with 200 buyers last month and a 4.4-star rating from 296 reviews. It is one of the strongest value picks in this category for North American buyers needing a ready-to-use corded unit.
Check price on AmazonBest for
North American DIYers who want a high-speed, plug-in corded detail sander at a low price with a strong track record of verified purchases
Skip if
Anyone prioritizing cordless freedom or needing a heavier-duty unit for aggressive material removal beyond light to moderate finishing work
- Power Source Corded Electric
- Voltage 120 Volts
- Amps 1.2 Amps
- Speed 13000 RPM
- Weight 2.46 Pounds
- Priced 34% below the category median ($34.79 across 22 tracked models)
Our scorecard
-
Owner rating4.4/5
4.4 average across 296 owner ratings
-
Popularity2.7/5
296 owner reviews, more than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The HYCHIKA TX104 operates on standard 120V household current at 1.2 amps and hits 13000 RPM, putting it at the top of the no-load speed range among corded detail sanders near the $20 to $25 price point. At 2.46 pounds, it is a lightweight unit that keeps fatigue low during detail work on furniture, trim, and tight corners.
With 200 purchases last month and 296 total reviews holding a 4.4-star average, the TX104 has a verified demand record that outpaces many competing models. The combination of 120V compatibility, 13000 RPM speed, and sub-$25 pricing makes it a practical default recommendation for North American buyers entering the corded detail sander market.
Owners report it handles finish sanding and light stock removal comfortably. At 1.2 amps the motor sits at the lower end of corded power for more aggressive tasks, so buyers tackling heavy material removal may want to consider a higher-amperage unit. For standard finishing and touch-up work, the HYCHIKA TX104 covers the job efficiently.
Pros
- 120V compatibility means no transformer needed for North American households
- 13000 RPM no-load speed is at the top of the corded budget class
- 2.46-pound weight reduces fatigue during extended sessions
- 200 purchases last month and 296 reviews confirm active, verified demand
- At $22.94, it delivers a strong speed-to-price ratio
Cons
- 1.2 amps limits output for aggressive material removal compared to higher-powered corded units
- Corded tether restricts reach and maneuverability in confined or hard-to-access spots
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Amps | 1.2 Amps |
| Speed | 13000 RPM |
| Weight | 2.46 Pounds |
Performance notes
The TX104 is a corded electric sander running at 120V and 1.2 amps with a 13000 RPM no-load speed. It weighs 2.46 pounds. The 120V power source makes it plug-and-use on standard North American outlets. The 13000 RPM speed is well-suited to fine finishing passes, trim work, and small surface prep tasks.
What buyers say
Owners across 296 reviews rate the TX104 consistently well, noting smooth performance and easy pad changes at a price that does not require much commitment. The high monthly purchase volume backs up the positive sentiment. Some reviewers note that the unit is best matched to light to moderate finishing rather than heavy stock removal, which aligns with the 1.2-amp spec.
Similar power tools and workshop machinery to consider
Featured in
Frequently asked questions
Does the HYCHIKA TX104 work on standard US 120V outlets?
Yes. The TX104 is rated at 120V and plugs directly into standard North American household outlets without any adapter or transformer.
How fast does the HYCHIKA TX104 run?
The listed specs show a no-load speed of 13000 RPM, which is in the upper range for budget corded detail sanders and suitable for finish sanding and trim work.
Is the TX104 good for heavy material removal?
At 1.2 amps, the TX104 is best suited for finish sanding and light prep work rather than aggressive stock removal. For heavier tasks, a higher-amperage corded model would be a better fit. Reach out at hello@toolgalaxy.com if you need a recommendation.