Enventor Z1C-HW01-3288EP Drill Blue Review
Our verdict
The Enventor Z1C-HW01-3288EP is a corded 13-amp, 850 RPM rotary hammer rated 4.6 stars by 105 verified owners at $75.99, combining a known amperage spec with consistent buyer satisfaction at a competitive price.
Check price on AmazonBest for
Contractors and DIYers who want a standard-voltage corded rotary hammer with verified owner track record and published amperage and RPM specs
Skip if
You need a compact or cordless model; at 15 inches tall and 12 inches long, the Z1C-HW01-3288EP is a full-size stationary-style tool
- Power Source Corded Electric
- Voltage 110 Volts (AC)
- Amps 13 Amps
- Speed 850 RPM
- Dimensions 12"L x 4.5"W x 15"H
- Priced 47% below the category median ($144.32 across 49 tracked models)
Our scorecard
-
Owner rating4.6/5
4.6 average across 105 owner ratings
-
Popularity0.8/5
105 owner reviews, fewer than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The Enventor Z1C-HW01-3288EP runs on 110V AC power with a 13-amp draw, keeping it compatible with standard North American circuits. At 850 RPM the tool sits at the lower end of the rotary hammer speed range, a deliberate trade-off that prioritizes controlled hammer blows into concrete over high-speed spinning that would suit lighter materials.
At $75.99 with 105 reviews and a 4.6-star rating, the Z1C-HW01-3288EP has built real market credibility. The roughly 100 units purchased per month indicates sustained demand rather than a one-time sales event.
The listed dimensions of 12 inches long, 4.5 inches wide, and 15 inches tall define this as a full-body rotary hammer. Buyers working in confined spaces or needing a more maneuverable form factor should compare footprint carefully against compact alternatives in this category.
Pros
- Corded 13-amp motor on 110V AC for continuous power without battery management
- 850 RPM tuned for concrete and masonry drilling rather than general-purpose spinning
- 4.6 stars across 105 reviews provides a reliable picture of real-world owner satisfaction
- Priced at $75.99, offering solid spec transparency for the cost
Cons
- At 15 inches tall the tool is bulkier than compact rotary hammers in the same category
- 850 RPM is on the slower side compared to several competitors at similar price points
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 110 Volts (AC) |
| Amps | 13 Amps |
| Speed | 850 RPM |
| Dimensions | 12"L x 4.5"W x 15"H |
Performance notes
Running on 110V AC at 13 amps, the Enventor Z1C-HW01-3288EP delivers continuous corded power for concrete, brick, and block work. The 850 RPM speed is intentionally moderate for a rotary hammer, designed to maximize hammer energy transfer rather than rotation speed. Physical dimensions of 12x4.5x15 inches indicate a full-body unit well suited for bench-supported or floor-level drilling setups.
What buyers say
Owners consistently rate the Enventor Z1C-HW01-3288EP highly, with 105 reviews averaging 4.6 stars. The corded reliability and familiar 13-amp power level are the most cited advantages. The low RPM is inherent to the rotary hammer category and not flagged as a shortcoming by experienced buyers.
Similar power tools and workshop machinery to consider
Frequently asked questions
Does the Enventor Z1C-HW01-3288EP work on standard US outlets?
Yes, based on the listed specs it runs on 110V AC, which is standard for North American households and job sites. The 13-amp draw means a dedicated 15-amp circuit is recommended to avoid tripping breakers.
Is 850 RPM fast enough for rotary hammer work?
For concrete and masonry drilling, yes. Rotary hammers rely on impact energy rather than raw rotation speed. The 850 RPM on the Z1C-HW01-3288EP is within the normal operating range for corded rotary hammers focused on controlled material penetration.
Where can I get additional specs for the Enventor Z1C-HW01-3288EP?
For specs not covered here, contact the ToolGalaxy research team at hello@toolgalaxy.com.