Enventor Z1C-HW01-3288EP Drill Review
Our verdict
The Enventor Z1C-HW01-3288EP draws 12.5 amps at 850 RPM from a 120-volt outlet and has earned a 4.7-star rating with 100 purchases per month despite just 67 reviews, signaling strong early momentum as a capable corded rotary hammer under $80.
Check price on AmazonBest for
Contractors and serious DIYers who need a corded, high-amperage rotary hammer for regular concrete anchor drilling and foundation work where tool mass aids penetration.
Skip if
Anyone who needs a lightweight tool for overhead work; at 15 pounds, this drill is a two-handed, downward-force application machine.
- Power Source Corded Electric
- Voltage 120 Volts
- Amps 12.5 Amps
- Speed 850 RPM
- Weight 15 Pounds
- Dimensions 9"L x 12"W x 4"H
- Priced 45% below the category median ($144.32 across 49 tracked models)
Our scorecard
-
Owner rating4.7/5
4.7 average across 67 owner ratings
-
Popularity0.6/5
67 owner reviews, fewer than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The Enventor Z1C-HW01-3288EP draws 12.5 amps from a standard 120-volt outlet and runs at 850 RPM, measuring 9 by 12 by 4 inches and weighing 15 pounds. The large form factor places it firmly in the heavy-duty corded rotary hammer segment, best suited for sustained concrete and masonry work at floor or wall level rather than overhead anchor setting.
The data pattern here stands out: 4.7 stars from just 67 reviews, with 100 purchases per month. The high demand relative to review count suggests buyers are purchasing faster than reviews accumulate, a strong signal of word-of-mouth adoption among contractors who need a high-amperage corded tool without paying premium brand prices.
At $78.99, the Enventor Z1C-HW01-3288EP competes directly with VEVOR's SDS-Plus model but brings a higher ratings average and stronger monthly purchase count. The 850 RPM is well-suited to the 1-1/4 inch class range, and the 15-pound mass helps drive larger-diameter anchors into concrete where downward force is an asset rather than a liability.
Pros
- 12.5 amps at $78.99 delivers strong corded value per watt
- 4.7 stars with 100 or more monthly purchases shows rapid growing confidence
- 120-volt corded design for unlimited runtime on any standard circuit
- 850 RPM speed is well-suited for large-diameter anchor drilling
- 9 by 12 by 4 inch form factor indicates a stable, substantial grip design
Cons
- 15-pound weight limits practical use to downward or horizontal drilling angles
- Only 67 reviews, a small sample for verifying long-term durability
- No BPM or impact energy spec is published in the listing
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Amps | 12.5 Amps |
| Speed | 850 RPM |
| Weight | 15 Pounds |
| Dimensions | 9"L x 12"W x 4"H |
Performance notes
The Enventor Z1C-HW01-3288EP operates at 12.5 amps and 120 volts with 850 RPM output, weighing 15 pounds with a 9 by 12 by 4 inch footprint. Best suited for floor slab and foundation anchor drilling where tool mass assists penetration. No BPM or joule impact energy figure is listed. The corded 120-volt design is compatible with standard North American circuits.
What buyers say
Owners praise the powerful corded performance and solid build quality at the sub-$80 price point. The main concern noted across reviews is the weight, which several buyers explicitly flag as limiting the tool to downward-facing drilling angles. The high monthly purchase rate relative to review count suggests positive contractor word-of-mouth.
More from Enventor
Similar power tools and workshop machinery to consider
Frequently asked questions
Can the Enventor Z1C-HW01-3288EP be used for overhead drilling?
At 15 pounds, sustained overhead use would be highly fatiguing and is not a practical application. Based on its specs and form factor, it is best suited for horizontal or downward drilling where the weight assists penetration.
Is the Enventor brand well-established?
The listing shows 4.7 stars and 100 or more monthly purchases despite only 67 reviews, suggesting a newer brand gaining traction quickly. Verify warranty terms and seller reputation before purchasing.
Have questions about heavy-duty corded rotary hammers?
Email hello@toolgalaxy.com and the ToolGalaxy team can help compare corded options by power, weight, and application.