SKIL 9295-01 Grinder Review
Our verdict
The SKIL 9295-01 is the highest-volume grinder in this batch with 600 units bought per month, a 4.6-star rating across 1,800 reviews, and a $27.99 price that makes it the clearest budget value pick for general angle grinding.
Check price on AmazonBest for
Budget-conscious DIYers, homeowners, and hobbyists who need a lightweight, capable corded angle grinder for everyday cutting, grinding, and surface prep
Skip if
You need professional-grade sustained power for heavy fabrication; 720 watts will limit performance on thick structural steel or extended production runs
- Power Source AC
- Voltage 120 Volts
- Speed 11000 RPM
- Motor 720 watts
- Weight 4 Pounds
- Priced 72% below the category median ($98.50 across 92 tracked models)
Our scorecard
-
Owner rating4.6/5
4.6 average across 1,800 owner ratings
-
Popularity4.3/5
1,800 owner reviews, more than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
At $27.99, the SKIL 9295-01 undercuts every other grinder in this batch by a dramatic margin. Its 720-watt motor and 11000 RPM speed are respectable for the price, and the 4-pound body makes it one of the lightest and easiest-to-control grinders available. Running on standard 120-volt AC power, it is broadly compatible with any shop or job site.
The 1,800-review count at 4.6 stars gives the 9295-01 a legitimacy that pure entry-level tools often lack. Add 600 units bought per month and this is not just a cheap grinder that a few buyers regret; it is a broadly used, widely validated tool that consistently meets buyer expectations. That combination of price, demand, and owner satisfaction puts it in a class of its own for value.
The trade-off is the 720-watt motor. For cutting rebar, grinding welds on thick steel, or sustained fabrication sessions, a 900-watt or higher tool will handle the load more comfortably. The 4-pound weight makes it a natural fit for lighter work, surface finishing, and occasional use where portability and cost matter most.
Pros
- Exceptional value at $27.99, far below any comparable grinder in this batch
- 4.6 stars across 1,800 reviews shows genuine, broad owner satisfaction
- 600 units bought per month is the highest purchase volume in this entire grinder group
- Lightweight at 4 pounds, reducing fatigue for sustained or overhead use
- 11000 RPM competitive speed for cutting discs and surface finishing
Cons
- 720 watts is the second-lowest wattage in this batch after the Proxxon 38544, limiting heavy fabrication performance
- Not suited for professional production grinding where 900 to 1800-watt motors are the standard
- Budget price point may reflect compromises in component longevity under sustained professional use
Specifications
| Power Source | AC |
|---|---|
| Voltage | 120 Volts |
| Speed | 11000 RPM |
| Motor | 720 watts |
| Weight | 4 Pounds |
Performance notes
AC powered at 120 volts and 720 watts with an 11000 RPM no-load speed. Weighs 4 pounds. No published dimensions. The 4-pound body and 11000 RPM make it particularly effective for cutting discs, light surface finishing, rust removal, and general DIY grinding tasks where extreme motor output is not required.
What buyers say
Owner feedback is strongly positive for the price tier. With 1,800 reviews at 4.6 stars, buyers consistently call out the SKIL 9295-01's value, light weight, and reliable performance for home and hobby use. The main critique from reviewers is that heavier production tasks push the 720-watt motor harder than it was designed for, but buyers using it within its intended application are consistently satisfied.
More from SKIL
Similar power tools and workshop machinery to consider
Frequently asked questions
Is the SKIL 9295-01 good enough for cutting tile or concrete?
Based on specs, the 720 watts and 11000 RPM are adequate for cutting tile with an appropriate disc. Concrete cutting is more demanding and may stress the 720-watt motor over extended cuts. For occasional light concrete work it may suffice, but a higher-wattage grinder is safer for repeated use.
How does the SKIL 9295-01 compare to the Makita 9557PBX1 at the same use level?
The Makita 9557PBX1 costs $109.00 and offers 900 watts at 11000 RPM with 3,960 reviews at 4.8 stars. The SKIL is $27.99, 720 watts, 1,800 reviews at 4.6 stars. For casual DIY work the SKIL is compelling value; for regular or demanding use the Makita's higher wattage and brand track record justify the price difference.
Have questions about which grinder is right for your project?
Reach us at hello@toolgalaxy.com and we will help you match the right grinder to your application and budget.