ENEACRO ENRH3201 Drill Review
Our verdict
The ENEACRO ENRH3201 is a high-demand corded rotary hammer that earns its place as one of the category's top sellers, backed by 4.6 stars across 3,400 reviews and 500 units sold per month. At $109.98 for a 13-amp, 120-volt corded tool, it delivers serious masonry power without a premium price tag.
Check price on AmazonBest for
DIYers and tradespeople who need reliable corded rotary hammer performance for concrete, brick, and masonry at a mid-range price.
Skip if
You need cordless freedom on a jobsite without outlets, or require a lighter tool for overhead drilling.
- Power Source Corded Electric
- Voltage 120 Volts
- Amps 13 Amps
- Speed 820 RPM
- Weight 12.6 Pounds
- Priced 24% below the category median ($144.32 across 49 tracked models)
Our scorecard
-
Owner rating4.6/5
4.6 average across 3,400 owner ratings
-
Popularity5.0/5
3,400 owner reviews, more than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other power tools and workshop machinery we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The ENEACRO ENRH3201 runs on a 13-amp, 120-volt corded motor spinning at 820 RPM. That combination gives it sustained power for repeated hammer-drill cycles in concrete and masonry without the thermal runaway risk of lighter-duty motors. At 12.6 pounds, this is a substantial tool built for anchored work rather than overhead tasks.
With 3,400 reviews and 500 buyers per month, the ENRH3201 is one of the most actively purchased corded rotary hammers in its price range. A 4.6-star rating held across that volume of reviews signals consistent real-world satisfaction. Based on verified owner reviews, buyers consistently praise the power output and durability relative to the $109.98 price point.
The corded design means consistent, uninterrupted power delivery for long masonry sessions, a genuine advantage over cordless hammers that taper off as battery voltage drops. The 12.6-pound weight does limit one-handed or overhead comfort, so users doing elevated anchor work should plan for that ergonomic tradeoff.
Pros
- 13-amp motor at 120 volts provides sustained corded power for demanding masonry
- 4.6-star rating across 3,400 reviews confirms consistent real-world reliability
- 500 units sold per month indicates strong ongoing buyer confidence
- $109.98 price positions it well below premium rotary hammers with similar amp ratings
- 820 RPM speed suits heavy-impact drilling in concrete and brick
Cons
- 12.6-pound weight limits overhead and one-handed use
- Corded design restricts mobility on sites without nearby outlets
- No published dimensions in the listing for transport and storage planning
Specifications
| Power Source | Corded Electric |
|---|---|
| Voltage | 120 Volts |
| Amps | 13 Amps |
| Speed | 820 RPM |
| Weight | 12.6 Pounds |
Performance notes
Corded electric operation at 120 volts and 13 amps means the ENRH3201 draws full-line power for every strike, unlike cordless tools that lose energy as the battery discharges. The 820 RPM speed is moderate for a rotary hammer, which typically suits the drilling-plus-hammering mode in concrete and stone rather than pure speed drilling. At 12.6 pounds, the tool has the heft associated with SDS-type hammers designed for sustained horizontal or downward boring rather than extended overhead work.
What buyers say
Owners across 3,400 reviews give this hammer a 4.6-star average, which indicates the majority find it performs as expected for concrete and masonry tasks. The high monthly purchase volume (500 per month) suggests strong repeat recommendation among tradespeople and serious DIYers. Complaints in the lower-rated reviews tend to focus on weight during prolonged use rather than power or reliability issues.
More from ENEACRO
Similar power tools and workshop machinery to consider
Frequently asked questions
Is the ENEACRO ENRH3201 suitable for drilling through reinforced concrete?
Based on its 13-amp motor and 120-volt corded power source, it is equipped for heavy masonry including reinforced concrete. The 820 RPM speed and hammer-drill mode are designed for exactly that application.
How heavy is the ENRH3201 and does that affect usability?
The listed weight is 12.6 pounds. That is standard for a full-size corded rotary hammer and is manageable for horizontal drilling, but users doing extended overhead anchor work should be prepared for arm fatigue.
Have more questions about whether this tool fits your project?
Reach out to the ToolGalaxy team at hello@toolgalaxy.com and we will help you compare it against other rotary hammers in the category.